Sempre Renowator 575 is a white fine grain renovation finish supplied in a 15kg bag. It is part of the Sempre renovation product range and is intended for finishing work where a compatible renovation filler is specified. The product number 575 identifies this particular finish, helping distinguish it from other mortars and preparation products in the Renowator range.

Product details

• Brand: Sempre
• Range: Renowator
• Product number: 575
• Type: fine grain renovation finish
• Colour: white
• Bag size: 15kg
• Store SKU: 575
• Buying unit: one bag

Selecting the correct renovation product

Match the finish to the existing substrate and the complete renovation specification before work starts. The Renowator range contains products for different stages of work, so choose by the full product number and intended application. This listing is for the 575 fine grain finish; it is not a substitute for every base coat, repair mortar or general purpose filler.

Check the condition of the area that will receive the finish. Loose or unsound material and underlying defects need attention before a finishing layer is applied. Where the work forms part of a specified renovation system, use the preparation products and sequence required by that system. Ask the installer to confirm suitability when the existing surface or previous treatment is unknown.

Planning and application

Read the instructions supplied with the bag before mixing and applying the material. Follow the manufacturer requirements for water addition, working time, layer thickness and drying conditions. Do not estimate these values from a different Renowator product, because products with similar names can have different application requirements.

Calculate the quantity needed using the actual area and the manufacturer consumption guidance for the proposed finish. Plan how the surface will be divided into workable sections, and have clean mixing equipment and suitable finishing tools ready before beginning. Keep other materials separate to avoid contamination of the batch.

Storage and finishing stages

Protect unopened bags from moisture and check the packaging for storage and shelf-life information. Allow the applied material to dry as directed before any subsequent coating or decoration. Confirm that the selected coating is compatible with the renovation finish and the complete wall build-up.

The listed pack is one 15kg bag. Browse our tools for application equipment, or consult Sempre renovation product information when planning the system.

The post Sempre Renowator 575 White Fine Grain Renovation Finish 15kg appeared first on DP Render Store Sheffield.

ETICS SYSTEM

BRICK EFFECT

STONE EFFECT

VAPOUR PERMEABLE

25KG BUCKET

BIO-PROTECT FORMULA

The post CT60 VISAGE BRICK EFFECT – 25KG appeared first on DP Render Store Sheffield.

*COLOUR CODE TIBET 6 AS SEEN IN PRODUCT IMAGE*

The post CT177 MOSAIC – ( Colour Code: TIBET 6 ) appeared first on DP Render Store Sheffield.

The post CT760 VISAGE ARCHITECTURAL CONCRETE appeared first on DP Render Store Sheffield.

BRICK EFFECT

EXTERIOR USE

COLOUR OPTIONS

ETICS SYSTEM

What Is Brick Effect Stencil – London Bricks Used For?

Brick Effect Stencil – London Bricks is designed to help create a realistic brick-effect render finish on external façades, garden walls, fences, and other suitable rendered surfaces. It gives the appearance of traditional brickwork without the cost, weight, or labour involved in building with real bricks or installing brick slips.

The stencil is used as part of a decorative render system to form a clear London brick pattern before the final finish is revealed. When combined with suitable coloured render, it can help achieve anything from a classic cottage-style façade to a more modern industrial brick-effect look.

This stencil is especially useful for façade renovation projects, external wall insulation finishes, and decorative feature areas where a brick-style appearance is required. It can be used with compatible Ceresit decorative renders, including CERESIT CT60 Visage, which is designed for brick and stone effect finishes using specialist stencil systems.

Key Properties Of Brick Effect Stencil – London Bricks

• Creates a realistic London brick-effect render pattern
• Suitable for façades, fences, feature walls, and external decorative areas
• Helps achieve a brick-style finish without real brick slips
• Designed for use with compatible decorative façade renders
• Useful for external wall insulation and façade renovation projects
• Can be combined with different render colours for traditional or industrial effects
• Helps reduce installation complexity compared with traditional brick cladding

For the full decorative system, combine Brick Effect Stencil – London Bricks with a suitable façade primer, base coat, reinforcement layer, and compatible decorative render. For the main brick-effect finish, consider CERESIT CT60 Visage. For base coat and reinforcement work, explore CERESIT CT85 Flex Adhesive and Base Coat Render. For silicone façade finishes on other areas of the project, see CERESIT CT74 Silicone Self Clean Render.

Learn more about façade systems, decorative finishes, and ETICS solutions on the official Ceresit international website.

The post Brick Effect Stencil – London Bricks | DP Render Store appeared first on DP Render Store Sheffield.

The post CT174 – Top Coat Machine Spray Render – 1mm Grain – Silicate Silicone Aquastatic – 25kg appeared first on DP Render Store Sheffield.

ETICS SYSTEM

SELF-CLEANING

WATER REPELLENT

VAPOUR PERMEABLE

WEATHER RESISTANT

25KG BUCKET

What Is CT74 Used For?

CERESIT® CT74 is a silicone-based decorative render designed for creating durable thin-layer finishes on exterior façades. It is suitable for use on prepared mineral substrates, concrete, traditional renders, gypsum boards, chipboard panels, and external wall insulation systems.

CT74 is especially suitable for use within the CERESIT Ceretherm ETICS system, where it provides a flexible, weather-resistant and vapour-permeable top coat. This helps protect the façade from rain and changing weather conditions while still allowing moisture vapour to escape from the wall structure.

The silicone formula creates a hydrophobic surface that helps repel water and supports a self-cleaning effect. This makes CT74 a strong choice for UK façade projects, refurbishments, new builds and external wall insulation work where long-term appearance and protection are important.

Enhanced with BioProtect technology, CT74 helps reduce the risk of algae, mould and fungal growth on the finished surface. It can be applied manually or by machine, making it suitable for both smaller projects and larger professional render applications.

Key Properties of CT74

• Silicone thin-layer decorative render for exterior façades
• Suitable for CERESIT Ceretherm ETICS systems
• Hydrophobic surface with self-cleaning effect
• Excellent vapour permeability and weather resistance
• Flexible finish with good resistance to cracking
• UV-resistant colours with long-term durability
• BioProtect formula helps resist algae, mould and fungi
• Suitable for manual or machine application
• Supplied in a 25kg bucket

For best results, apply CERESIT CT74 over a properly prepared and primed surface. Use CERESIT CT16 primer to improve adhesion and help achieve a consistent final colour. For reinforcement and base coat preparation within the insulation system, consider CERESIT CT85 Flex Adhesive and Base Coat.

Learn more about façade protection, render systems and Ceresit ETICS solutions on the official Ceresit international website.

The post CT74 – Top Coat Render Silicone Self Clean – 1.5mm Grain – 25kg appeared first on DP Render Store Sheffield.

Decorative and protective plaster-topcoat render for indoor and outdoor use. Containing in its composition carefully selected coloured aggregates and mica, it allows you to give walls an effective and elegant look. Recommended for making thin-layer plasters on typical building substrates such as concrete, cement plaster, cement-lime plaster, and gypsum boards. Perfect for creating decorative surfaces and architectural details on even and properly prepared mineral substrates. The plaster mass creates a flexible coating resistant to weather conditions. The product is ready to use.

Before applying the plaster, prime the substrate with SEMPRE MULTI GRUNT.

The post Marmare Stone – Decorative and Protective Plaster- Top Coat Render – 25kg appeared first on DP Render Store Sheffield.

M9-984 COLOUR-Ready to use mosaic plastering mix for preparing outdoor and indoor decorative and protective coatings on typical construction foundations. Because of high resistance to atmospheric factors and mechanical damages recommended for public utility rooms and lower parts of elevations (pedestal, cornice etc.). The product is applied with a float. For best results before applying the plaster, the foundation should be primed with SEMPRE MULTI GRUNT priming agent.

The post Mosaic Plaster/Mosaic Render Sand-Finish Structure (smoothed) 25kg-M9-984 COLOUR appeared first on DP Render Store Sheffield.

The post Architectural Concrete Effect Plaster Render – 15kg appeared first on DP Render Store Sheffield.