Description
TIMCO SDS Plus Drill Bit 10mm x 210mm
The TIMCO SDS Plus Drill Bit 10mm x 210mm is a hammer drill bit for compatible SDS Plus rotary hammers. The photographed packaging identifies it for brick, block and concrete. Supplied as one bit on its retail hanger, it combines a 10mm nominal drilling diameter with a listed overall length of 210mm.
Select the right size for the task
This 210mm version provides an intermediate overall length between the 160mm and 260mm options. Select it when the hole specification and access require this format, while checking the usable drilling depth separately.
Overall length is not the same as usable drilling depth. Part of the bit is held by the tool, so check the working-length requirements for your application before ordering. When drilling for a fixing, use the hole diameter, depth and preparation method specified by the fixing manufacturer.
Product details
- Brand: TIMCO
- Type: SDS Plus hammer drill bit
- Nominal diameter: 10mm
- Listed overall length: 210mm
- Packaging applications: brick, block and concrete
- Supplied quantity: one bit
- Store reference: TSDSDB10X210
Before drilling
Confirm that your rotary hammer accepts SDS Plus tooling. Inspect the shank and cutting tip, fit the bit according to the tool instructions and check that it is retained correctly. Identify the base material and make sure the drilling position is clear of concealed services. Use the drilling mode and technique appropriate to the substrate.
Let the tool work without excessive pressure and clear drilling dust as recommended for the task. Stop if the bit binds or encounters an unexpected obstruction. Use the appropriate eye, hearing and dust protection, and follow your tool and material instructions.
Allow the bit to cool before handling or storage. Keep the shank clean and inspect the cutting tip before reuse. For range information, see the TIMCO power tool accessories brochure. Compare other sizes in our power tool accessories category.









