Description
TIMCO SDS Plus Drill Bit 10mm x 260mm
The TIMCO SDS Plus Drill Bit 10mm x 260mm is a hammer drill bit for compatible SDS Plus rotary hammers. The photographed packaging identifies it for brick, block and concrete. Supplied as one bit on its retail hanger, it combines a 10mm nominal drilling diameter with a listed overall length of 260mm.
Select the right size for the task
This 260mm version is the longer of the three 10mm options stocked in this range. Choose it when additional overall reach is needed, while checking the available working length and the depth required by the installation.
Overall length is not the same as usable drilling depth. Part of the bit is held by the tool, so check the working-length requirements for your application before ordering. When drilling for a fixing, use the hole diameter, depth and preparation method specified by the fixing manufacturer.
Product details
- Brand: TIMCO
- Type: SDS Plus hammer drill bit
- Nominal diameter: 10mm
- Listed overall length: 260mm
- Packaging applications: brick, block and concrete
- Supplied quantity: one bit
- Store reference: TSDSPDB10X260
Before drilling
Confirm that your rotary hammer accepts SDS Plus tooling. Inspect the shank and cutting tip, fit the bit according to the tool instructions and check that it is retained correctly. Identify the base material and make sure the drilling position is clear of concealed services. Use the drilling mode and technique appropriate to the substrate.
Let the tool work without excessive pressure and clear drilling dust as recommended for the task. Stop if the bit binds or encounters an unexpected obstruction. Use the appropriate eye, hearing and dust protection, and follow your tool and material instructions.
Allow the bit to cool before handling or storage. Keep the shank clean and inspect the cutting tip before reuse. For range information, see the TIMCO power tool accessories brochure. Compare other sizes in our power tool accessories category.









