Kit contents

• Deep hole construction pencil
• Replacement graphite leads in a holster
• Black clog-free marker
• Two long nib markers
• Protective foldable storage case

The supplied pencil uses 2.8mm graphite leads, as identified on the packaging. The mix of pencil and ink markers gives you a choice of marking methods for different stages of a job. Choose the tool according to the surface and the type of line or point you need to leave.

Organised storage

The case has a five-slot internal storage frame to hold the tools in place. Magnetic clasps keep the case closed, and integrated magnets allow it to attach to suitable metal surfaces or equipment. Keeping the tools in their assigned positions makes it easier to check the kit before leaving a work area.

Using your marking tools

Check the measurements and the position of the mark before cutting, drilling or fixing. Test the selected pencil or marker on an inconspicuous area, particularly on a finished or decorative surface. Permanent ink may leave a lasting mark, so plan where it will be visible and whether the mark can remain on the completed work.

Use the long nib or deep hole tool where its shape helps you reach a fixing position through a component. Keep the component steady while marking and confirm the final position after moving it. Use suitable measuring and setting-out tools alongside the kit.

Care and product reference

Replace marker caps after use and protect the tips from damage. Keep spare leads in their dispenser and use compatible replacements. Return the tools to the case for storage and transport.

Store SKU: AMK5. Barcode: 5060668274149. For the manufacturer’s kit overview, see the TRACER AMK5 product information. This listing supplies one kit; measuring tools and additional consumables are sold separately.

The post Tracer 5 Piece Construction Marker Kit with Case appeared first on DP Render Store Sheffield.

Compact permanent marking

TRACER specifies a 1–2mm bullet point tip and quick-drying ink for this model. The cap is compatible with a lanyard, giving you another way to keep the marker close to hand when moving between tasks. A lanyard is not included in this single-marker listing.

Use the marker where a visible, lasting ink line or identification mark is appropriate. Before marking a finished component, check that permanent ink is suitable for the surface and the work you are doing. The final appearance of a line depends on the surface texture, pressure and condition of the tip.

Product details

• Brand: TRACER
• Product: Mini Marker
• Ink colour: black
• Tip: 1–2mm bullet point
• Quick-drying ink
• Lanyard-compatible cap
• Quantity supplied: one marker
• Store SKU: AMM50
• Barcode: 5060668274699

Before making a mark

Check the measurement and the position of the line before you start. Test the ink in an inconspicuous area when working on a new surface, especially where the mark may remain visible after installation. Keep important identification marks away from areas that will be cut off or covered during the next stage of work.

Use a ruler, square or other suitable guide where you need a straight or accurately located line. Allow the ink to dry before handling the marked area, and recheck the position before cutting, drilling or fixing.

Care and storage

Replace the cap securely after use to protect the tip and help prevent the ink drying out. Keep the marker away from excessive heat and avoid crushing it beneath heavy tools. Browse our hand tools for related equipment. Further specifications are on the TRACER Mini Marker product page. Additional markers, lanyards and measuring tools are sold separately.

The post Tracer Mini Marker appeared first on DP Render Store Sheffield.

Precision pencil and replacement leads

The pencil has an aluminium body and a textured grip area. Its anti-roll shape helps it stay where you put it on a suitable flat surface. The supplied 1.3mm graphite leads are 110mm long, and the separate dispenser helps keep the replacements together and protected during transport.

A refillable pencil lets you replace the lead while continuing to use the same body and holster. Check the replacement lead diameter before buying refills: this precision model uses 1.3mm leads. Other lead sizes in the TRACER range are intended for different pencils.

Kit details

• Brand: TRACER
• Model: Pro Precision Construction Pencil Kit
• Pencil body: aluminium
• Lead diameter: 1.3mm
• Replacement lead length: 110mm
• Included refills: 24 graphite leads with dispenser
• Pencil holster included
• Store SKU: APPK1-PRO
• Barcode: 5060668273784

Marking and setting out

Select a line position that remains visible for the next stage of the job. Check the measurements before marking and recheck important dimensions before cutting or fixing. On a finished surface, test the graphite mark in an inconspicuous area first and check how it can be removed.

Keep the exposed lead length suitable for the task and avoid pressing harder than necessary. Support the workpiece and use an appropriate ruler, square or other guide when a straight or accurately positioned line is required.

Storage and care

Return the pencil to its holster when it is not in use and keep spare leads in the dispenser. Protect the tip from knocks and keep dirt out of the pencil mechanism. Browse our hand tools for related site equipment, or see the TRACER product information for this kit. Measuring tools and additional refills are sold separately.

The post Tracer Pro Precision Construction Pencil Kit appeared first on DP Render Store Sheffield.

Copy and transfer profiles

The gauge uses a row of moving pins that follow the outline of the shape placed against them. Its locking mechanism holds the copied profile while you move the tool to the workpiece. Both metric and imperial scales are provided, and the 250mm size is also described as 10 inches on the packaging.

TRACER identifies profile scribing applications including flooring, skirting and pipework. The gauge helps capture an outline; the accuracy of the finished fit still depends on positioning, marking and cutting the workpiece correctly.

Kit details

• Brand: TRACER
• Product: ProContour Gauge Marking Kit
• Gauge size: 250mm / 10 inches
• Lockable profile mechanism
• Metric and imperial scales
• Deep hole construction pencil with holster included
• Store SKU: ACG2
• Barcode: 5060668272657

Using the gauge

Position the gauge squarely against the profile you want to copy, allowing the pins to follow the outline without forcing them. Check that the captured shape represents the required cut line, then secure the profile with the locking mechanism before moving the tool.

Place the gauge on the material in the correct orientation and trace the outline with the supplied pencil. Allow for any required fitting clearance and check the mark before cutting. Where the profile is awkward or the material is valuable, make a trial template first and confirm that the shape fits as intended.

Care and storage

Keep the pins free from debris and check that they move normally before use. Protect the gauge from impacts and avoid placing heavy equipment on it in a tool bag. Store the pencil in its holster and use compatible replacement leads.

Browse our hand tools for related equipment. Manufacturer specifications are available in the TRACER product catalogue. Cutting tools and workpiece materials are supplied separately.

The post Tracer ProContour Gauge Marking Kit 250mm appeared first on DP Render Store Sheffield.

The Wesco WS2020K is a compact cordless glue gun with a 3.6V, 1.5Ah battery specification shown on its packaging. The blue and black trigger-operated tool is supplied boxed and is intended for applying compatible hot-melt glue. Its cordless format allows the working position to be chosen without a mains lead trailing directly from the gun during use.

Product details

• Brand: Wesco
• Model: WS2020K
• Tool type: cordless glue gun
• Battery voltage: 3.6V
• Battery capacity: 1.5Ah
• Colour: blue and black
• Buying unit: one boxed glue gun
• Store SKU: WS2020K

Choosing adhesive for the task

Select glue sticks that match the size and type required by the supplied tool instructions. The adhesive also needs to suit the materials being joined and the conditions in which the finished item will be used. Check these requirements before starting rather than assuming that every glue stick or every surface is interchangeable.

Plan the bond while the materials are clean and accessible. Trial the arrangement before applying adhesive, and decide how the parts will be supported while the bond forms. For an unfamiliar material, check the adhesive guidance and test a small representative area where appropriate.

Preparing the glue gun

Read the instructions supplied with the WS2020K before charging and operating it. Use the specified charging connection and power requirements, and follow the indicators and timing described for this model. Load adhesive only in the way directed by the manufacturer. Do not force a stick or try to clear a blockage while the tool is hot.

Prepare a suitable heat-resistant work area and protect nearby finishes from adhesive drips. Keep the hot nozzle and freshly applied glue clear of skin and other items that could be damaged by heat. Position the tool securely between applications and keep the work area organised.

After use

Switch off the gun and allow it to cool as directed before cleaning, handling the nozzle area or putting it away. Follow the supplied storage and maintenance instructions, and check the tool for damage before reuse. Keep the model identification with the tool so that the correct operating information remains easy to find.

Browse our hand tools for other site and workshop equipment.

The post Wesco WS2020K Cordless Glue Gun 3.6V appeared first on DP Render Store Sheffield.

The post TIMCO Tape Measure 5m appeared first on DP Render Store Sheffield.

Legal Notice: Age Restricted Item (18+)
This product is strictly classified as an age-restricted item. By proceeding with this order, you legally confirm that you are 18 years of age or older. Valid government-issued photo identification (such as a driving licence or passport) is mandatory for age verification upon in-store collection at our Sheffield counter. We cannot release this tool without matching proof of age.

Equip your workplace handles with the exceptionally sharp and durable TIMCO Snap-Off Utility Blades. These premium replacement cutting elements feature a standard 18mm height dimension. They are engineered specifically to deliver clean, precise scores across demanding trade materials like plasterboard, heavy insulation, packaging cardboard, and industrial floor coverings. The segment layout allows you to easily snap away worn tips to instantly renew your clean cutting point on site.

Heavy-Duty Cutting Performance with Utility Blades

This professional-grade Utility Blades cutting product is supplied in the model, blade size, and pack quantity stated in its name. You should always select a compatible tool or matching replacement casing before use to ensure complete operational safety. The high-carbon steel construction prevents early wear, giving trade professionals and serious DIYers complete stability under intense physical compression.

Product Details & Identifiers

• Product Name: TIMCO Snap-Off Utility Knife Blades 18mm
• Pack Quantity: 10 Pieces (Pack of 10)
• Store SKU: TUSOKB18MM
• Barcode: 5055893342923

Essential Safety Guidelines & Before Use Instructions

Always handle sharp edges carefully to avoid accidental workplace injuries on the job site. Use these heavy-duty Utility Blades sections only for their intended cutting purpose and store all spare packages securely away from minors. Always dispose of your old used razor fragments safely inside a certified sharps container. Please note that this specific item is temporarily available for in-store collection only. Strict age verification checks are legally required at the point of collection.

Complete Your Hand Tool Kit

Pair these replacement elements with our rugged metal utility knives or browse our full online inventory of industrial work gloves to protect your hands while working. For detailed official health and safety guidance regarding the legal usage, safe handling, and storage of sharp tools, you can consult the official Health and Safety Executive (HSE) guidelines online.

The post TIMCO Snap-Off Utility Knife Blades 18mm – Pack of 10 appeared first on DP Render Store Sheffield.

The TIMCO SDS Plus Drill Bit 10mm x 160mm is a hammer drill bit for compatible SDS Plus rotary hammers. The photographed packaging identifies it for brick, block and concrete. Supplied as one bit on its retail hanger, it combines a 10mm nominal drilling diameter with a listed overall length of 160mm.

Select the right size for the task

This 160mm version is the shorter of the three 10mm lengths stocked in this range. It is a practical choice when the required drilling depth and access allow a shorter bit, helping you avoid selecting unnecessary overall length.

Overall length is not the same as usable drilling depth. Part of the bit is held by the tool, so check the working-length requirements for your application before ordering. When drilling for a fixing, use the hole diameter, depth and preparation method specified by the fixing manufacturer.

Product details

• Brand: TIMCO
• Type: SDS Plus hammer drill bit
• Nominal diameter: 10mm
• Listed overall length: 160mm
• Packaging applications: brick, block and concrete
• Supplied quantity: one bit
• Store reference: TSDS10X160

Before drilling

Confirm that your rotary hammer accepts SDS Plus tooling. Inspect the shank and cutting tip, fit the bit according to the tool instructions and check that it is retained correctly. Identify the base material and make sure the drilling position is clear of concealed services. Use the drilling mode and technique appropriate to the substrate.

Let the tool work without excessive pressure and clear drilling dust as recommended for the task. Stop if the bit binds or encounters an unexpected obstruction. Use the appropriate eye, hearing and dust protection, and follow your tool and material instructions.

Allow the bit to cool before handling or storage. Keep the shank clean and inspect the cutting tip before reuse. For range information, see the TIMCO power tool accessories brochure. Compare other sizes in our power tool accessories category.

The post TIMCO SDS Plus Drill Bit 10mm x 160mm appeared first on DP Render Store Sheffield.

The TIMCO Professional PU Foam Gun is an applicator for standard 500ml and 750ml gun-grade foam canisters. It provides a handled trigger tool for placing expanding PU foam into gaps and cavities, with a long barrel to help direct the application. This listing supplies one professional applicator gun in its box; foam canisters and cleaner are purchased separately.

Professional applicator features

The lightweight aluminium body has an ergonomic soft-touch hand grip. TIMCO specifies an anti-stick PTFE coating to reduce foam build-up on the applicator, together with a lubricated, PTFE-coated valve. The barrel measures 180mm, giving access beyond the immediate position of the hand grip.

• Brand: TIMCO
• Professional model: 783113
• For standard 500ml and 750ml gun-grade PU foam canisters
• 180mm barrel
• Lightweight aluminium body
• Soft-touch grip and PTFE-coated components
• Includes two extension tubes and two tapered nozzles
• Store SKU: TPUFGP
• Barcode: 5055893388396

Choosing the correct foam

Check that the canister is a gun-grade product with a compatible fitting before attaching it. Choose the foam itself to suit the substrate and intended work. The applicator does not determine the insulation, adhesion, fire performance or curing characteristics of the material being dispensed; those details come from the foam manufacturer instructions and the relevant installation specification.

Preparation and care

Read the supplied gun instructions and the foam canister guidance before starting. Prepare the surfaces and protect adjoining finishes from accidental contact. Plan access to the joint so that the barrel or supplied extension can reach the required position without forcing the tool. Wear the protection specified for the foam and work in the conditions required by its manufacturer.

Keep the applicator clean according to the supplied instructions, using compatible cleaning products and the correct method. Inspect the fitting, trigger and barrel before reuse. Do not force damaged components or assume that cured material can be removed in the same way as fresh foam. Store the gun and any canister following their respective instructions between jobs.

See TIMCO professional foam gun information or browse our hand tools for other site equipment.

The post TIMCO Professional PU Foam Gun appeared first on DP Render Store Sheffield.

The post SOLID Turbo Mix Mixing Paddle 140mm appeared first on DP Render Store Sheffield.